======================================================================================================================= 1.4 [released 2023-06-07] ======================================================================================================================= 1.4.1.0 [available 2023-09-08] pre-requisite Windows 10 (64 bit), English, version 2004 or newer pre-requisite Microsoft .NET Framework 4.8 or newer pre-requisite Keysight IO Libraries Suite 18.1 or newer supported APM1000E, Keysight Serial Protocol Driver 2.0.0.1 supported Keysight DUT access scripts version 0.9.3 supported Keysight 81160A FW rev. 2.0.0.0-2.6 supported Keysight DSO-S FW 06.55.00401 supported Keysight MXR608A FW 11.06.00401 supported Microsoft Office Excel 2016, English bugfix Fix 'Transmitter clock frequency confirmation' calibration when using MXR oscilloscope. information This version is only compatible with Keysight Serial Protocol Driver 2.0.0.1. information Installer is only partially tested with MXR-type scope at all. For this use case the user has to consider this as Beta-version software. 1.4.0.14 [available 2023-06-07] pre-requisite Windows 10 (64 bit), English, version 2004 or newer pre-requisite Microsoft .NET Framework 4.8 or newer pre-requisite Keysight IO Libraries Suite 18.1 or newer supported APM1000E, Keysight Serial Protocol Driver 2.0.0.1 supported Keysight DUT access scripts version 0.9.3 supported Keysight 81160A FW rev. 2.0.0.0-2.6 supported Keysight DSO-S FW 06.55.00401 supported Keysight MXR608A FW 11.06.00401 supported Microsoft Office Excel 2016, English new Added support for APM1000E, Hardware revision B. new Added support for Keysight Serial Protocol Driver 2.0.0.1. new Add version verification check for Keysight Serial Protocol Driver. new Add address verification check for APM1000E in StationConfigurator. new Add logs for reading registers of APM1000E. information This version is only compatible with Keysight Serial Protocol Driver 2.0.0.1. information Installer is only partially tested with MXR-type scope at all. For this use case the user has to consider this as Beta-version software. ======================================================================================================================= 1.3 [released 2020-12-16] ======================================================================================================================= 1.3.5.1 [available 2023-09-08] pre-requisite Windows 10 (64 bit), English, version 1809 or newer pre-requisite Microsoft .NET Framework 4.8 or newer pre-requisite Keysight IO Libraries Suite 18.1 or newer supported APM1000E, Keysight Serial Protocol Driver 1.0.12.0 supported Keysight DUT access scripts version 0.9.3 supported Keysight 81160A FW rev. 2.0.0.0-2.6 supported Keysight DSO-S FW 06.55.00401 supported Keysight MXR608A FW 11.06.00401 supported Microsoft Office Excel 2016, English bugfix Fix 'Transmitter clock frequency confirmation' calibration when using MXR oscilloscope. information Installer is only partially tested with MXR-type scope at all. For this use case the user has to consider this as Beta-version software 1.3.4.2 [available 2023-08-03] pre-requisite Windows 10 (64 bit), English, version 1809 or newer pre-requisite Microsoft .NET Framework 4.8 or newer pre-requisite Keysight IO Libraries Suite 18.1 or newer supported APM1000E, Keysight Serial Protocol Driver 1.0.12.0 supported Keysight DUT access scripts version 0.9.3 supported Keysight 81160A FW rev. 2.0.0.0-2.6 supported Keysight DSO-S FW 06.55.00401 supported Keysight MXR608A FW 11.06.00401 supported Microsoft Office Excel 2016, English bugfix Change supported Keysight Serial Protocol Driver to 1.0.12.0. information Installer is only partially tested with MXR-type scope at all. For this use case the user has to consider this as Beta-version software 1.3.3.8 [available 2023-06-06] pre-requisite Windows 10 (64 bit), English, version 2004 or newer pre-requisite Microsoft .NET Framework 4.8 or newer pre-requisite Keysight IO Libraries Suite 18.1 or newer supported APM1000E, Keysight Serial Protocol Driver 1.0.15.0 supported Keysight DUT access scripts version 0.9.3 supported Keysight 81160A FW rev. 2.0.0.0-2.6 supported Keysight DSO-S FW 06.55.00401 supported Keysight MXR608A FW 11.06.00401 supported Microsoft Office Excel 2016, English new Add version verification check for Keysight Serial Protocol Driver new Add address verification check for APM1000E in StationConfigurator new Add logs for reading registers of APM1000E bugfix Fix horizonal scaling for graph in calibration report bugfix Fixed status registers for 100 MBase-T1 bugfix Noise band width was not set correctly in the SQI test at 100BASE-T1. bugfix Fixes the failure to start application due to improper WIBU versioning. bugfix Sanitize APM1000E address in case of downgrading. bugfix Fixes station configurator error messages about incorrect APM1000E serial number. bugfix Fixes unhandled exception when Keysight Serial Protocol Driver is not installed. information Installer is only partially tested with MXR-type scope at all. For this use case the user has to consider this as Beta-version software 1.3.1.2 [available 2021-05-17] pre-requisite Windows 10 (64 bit), English, version 2004 or newer pre-requisite Microsoft .NET Framework 4.7.1 or newer pre-requisite Keysight IO Libraries Suite 18.1 or newer supported APM1000E, Keysight Serial Protocol Driver 1.0.12.0 supported Keysight DUT access scripts version 0.9.1 supported Keysight 81160A FW rev. 2.0.0.0-2.6 supported Keysight DSO-S FW 06.55.00401 supported Keysight MXR608A FW 11.06.00401 supported Microsoft Office Excel 2016, English modification Reduced the required scope bandwidth to 2GHz instead of 4GHz. modification Increased the time base for the frequency measurement to 2µs (1000BASE-T1) and 5µs (100BASE-T1) to have more stable measurement / less fluctuation. bugfix In rare cases, a BER test caused a critical error while the results were being finalized. Now fixed. bugfix Sometimes, reloading a project file with incomplete calibrations caused an error. Now fixed. information Installer is only partially tested with MXR-type scope at all. For this use case the user has to consider this as Beta-version software. 1.3.0.5 [available 2020-12-16] supported APM1000E, Keysight Serial Protocol Driver 1.0.12.0 supported Keysight DUT access scripts version 0.9.1 supported Keysight 81160A FW rev. 2.0.0.0-2.6 supported Keysight DSO-S FW 06.55.00401 supported Keysight MXR608A FW 11.06.00401 modification Adapted DSO driver to work with MXR scope. modification Adapted calibration procedures to work with MXR scope (bandwidth, sample rate, etc.). information Installer is only partially tested with MXR type scope at all. For this use case the user has to consider this as Beta-version software. ======================================================================================================================= 1.2 [released 2020-08-17] ======================================================================================================================= 1.2.1.0 [available 2020-09-29] information Updated CodeMeter Runtime to version 7.10a to fix vulnerabilities CVE-2020-14513, CVE-2020-14519, CVE-2020-14509, CVE-2020-14517, CVE-2020-16233, and CVE-2020-14515. 1.2.0.15 [available 2020-08-25]: tested with Tested with APM1000E, Keysight Serial Protocol Driver 1.0.12 1.2.0.13 [available 2020-08-17]: new Support of 100BASE-T1. new Support of AMP1000E-CLK to allow clock frequency deviation. new Support of multiple APM1000E: the one used as media converter can be selected out of two or more APM1000E connected to the PC. new By default, DUT access is done in mixed mode by using scripts as well as loopback data analysis. tested with Tested with APM1000E, Keysight Serial Protocol Driver 1.0.10.0 tested with Tested with Keysight DUT access scripts version 0.9.1 tested with Tested with Keysight 81160A FW rev. 2.0.0.0-2.6 tested with Tested with Keysight DSO-S FW 06.55.00401 bugfix The bundled installer was configured wrong and forced a Windows warning message at some PCs. bugfix Add extra package filtering to deal with some special Ethernet devices. bugfix The ports for noise generator and scope/DUT were swapped in the connection diagram. bugfix Some DUT information was not saved properly in a ValiFrame project file. bugfix BER progress counter did not update the displayed counter values. modification N8190A is no longer supported as noise generator. modification Ethernet ports are shown in Windows' display names instead of internal names. modification Added some ExpertMode flags to the SQI test for optionally reducing the test strictness and test time. ======================================================================================================================= 1.00 [released 2020-02-20] ======================================================================================================================= 1.00 [available 2020-02-20] tested with Tested with APM1000E, Keysight Serial Protocol Driver 1.0.4.0 tested with Tested with Keysight 81160A FW rev. 2.0.0.0-2.6 tested with Tested with Keysight DSO-V (FW 06.30.01102), DSO and DSO-S known issue Connecting any RAD-Moon as a DUT to the same PC as the APM1000E is not supported. known issue No support of 100BASE-T1. known issue The signal generator sometimes re-flashes, if it was connected to another version of driver or related software. known issue Test Automation remote only runs in 32bit mode.