======================================================================================================================= 1.3 [released 2023-11-07] ======================================================================================================================= 1.3.0.2 [available 2023-11-07] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported D9010CPHC 1.70.9.0 supported Infiniium 06.60.00403 supported UXR Infiniium 11.50.00601 supported M8195A/97A 4.1.0.0 supported Three M8195A module configuration supported MS Excel 2016 supported MIPI C-PHY Spec 2.0 - CTS 1.0 bugfix Fixed the issue of "V_IH min spec" value in Test 2.1.1 is given as 880 mV instead of 740 mV. bugfix Fixed the issue of the HS Level Calibration Data A results shown at ValiFrame GUI are wrong. bugfix Fixed the issue of the Jitter/Eye Calibrations failed at 500Mbps. bugfix Fixed the issue of the Inter Pair Skew Calibration at 500Mbps is not loading properly. bugfix Fixed the issue of the In-system Calibration fails with wrong bandwidth error. known issue The Software does not support any custom sequence containing more than one Block and loop over the Pure HS Data Block. known issue When the test is running, if the user wants to switch AWG Mode from Dual Channel Mode to Four Channel Mode or the other way around, ValiFrame needs to be restarted to avoid an error in instrument initialization. ======================================================================================================================= 1.2 [released 2021-12-22] ======================================================================================================================= 1.2.0.2 [available 2021-12-22] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported D9010CPHC 1.40.1.0 supported Infiniium 06.60.00403 supported UXR Infiniium 10.25.01302 supported M8195A/97A 4.1.0.0 supported Three M8195A module configuration supported MS Excel 2016 supported MIPI C-PHY Spec 2.0 - CTS 1.0 modification Enhance test 2.3.2 with control of the resolution of VOD known issue The Software does not support any custom sequence containing more than one Block and loop over the Pure HS Data Block known issue When the test is running, if the user wants to switch AWG Mode from Dual Channel Mode to Four Channel Mode or the other way around, ValiFrame needs to be restarted to avoid an error in instrument initialization ======================================================================================================================= 1.1 [released 2021-03-31] ======================================================================================================================= 1.1.2.1 [available 2021-09-22] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported D9010CPHC 1.40.1.0 supported Infiniium 06.60.00403 supported UXR Infiniium 10.25.01302 supported M8195A/97A 4.1.0.0 supported Three M8195A module configuration supported MS Excel 2016 supported MIPI C-PHY Spec 2.0 - CTS 1.0 bugfix Fixed the issue of the glitch happened when the Sequence contains only one Pure HS Data Block and loop over it known issue The Software does not support any custom sequence containing more than one Block and loop over the Pure HS Data Block known issue When the test is running, if the user wants to switch AWG Mode from Dual Channel Mode to Four Channel Mode or the other way around, ValiFrame needs to be restarted to avoid an error in instrument initialization 1.1.1.9 [available 2021-07-06] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported D9010CPHC 1.40.1.0 supported Infiniium 06.60.00403 supported UXR Infiniium 10.25.01302 supported M8195A/97A 4.1.0.0 supported Three M8195A module configuration supported MS Excel 2016 supported MIPI C-PHY Spec 2.0 - CTS 1.0 bugfix Fixed the unexpected LP pulse in the PRBS signal when applying S-Parameter files for longer ISI channels bugfix Fixed the undershooting issue in the signal when there is a transition from LP to HS Level bugfix Fixed the error that appeared while saving Excel workbook with all calibrations and Tests bugfix Fixed the error in Test 2.2.2 when generating signal of sequence ULP.seq or ULPentry.seq known issue When the test is running, if the user wants to switch AWG Mode from Dual Channel Mode to Four Channel Mode or the other way around, ValiFrame needs to be restarted to avoid an error in instrument initialization 1.1.0.4 [available 2021-03-31] supported D9010CPHC 1.40.1.0 supported Infiniium 06.60.00403 supported UXR Infiniium 10.25.01302 supported M8195A/97A 4.0.0 supported One and two M8195A module configurations supported MS Excel 2016 supported MIPI C-PHY Spec 2.0 - CTS 1.0 modification Updated Test 2.3.3 and Test 2.3.4 according to MIPI C-PHY Spec 2.0 - CTS 1.0 modification Improved the order of Instrument Configuration in Station Configuration modification Improved the workbook export results for calibration and test procedures modification Improved the message to let the user know when it is necessary to buy maintenance information Three M8195A module configuration was not tested ======================================================================================================================= 1.0 [released 2020-06-18] ======================================================================================================================= 1.0.1 [available 2020-09-28] information Updated CodeMeter Runtime to version 7.10a to fix vulnerabilities CVE-2020-14513, CVE-2020-14519, CVE-2020-14509, CVE-2020-14517, CVE-2020-16233, and CVE-2020-14515 1.0.0 [available 2020-06-18] tested with D9010CPHC 1.40.0.0 tested with Infiniium 06.55.00504 tested with M8195A/97A 4.0.0 tested with MS Excel 2016 tested with One and two M8195A module configurations. Three module setup not tested information Supported CTS version C-PHY 2.0 CTS v1.0 r03 + BZ 8058 information According to BZ 8160 the Eye Opening and UI Jitter calibrations should be run with 1 pF and 2 pF Cpad, respectively. By default, 1 pF Cpad is used together with Package as file Reference_package_model_trio.s6p. To use either only package without CPAD manually or package with 2pF CPAD, select the provided S-Parameter files under 'C:\ProgramData\BitifEye\ValiFrameK1\CPhy\SParameter' information UXR support was not tested