===== N5991 MIPI M-PHY 5.0 ValiFrame ===== ======================================================================================================================= 1.2 [released 2023-10-16] ======================================================================================================================= 1.2.2.2 [available 2023-11-30]: prerequisite Windows 10 (64 bit), English, version 1809 or newer. prerequisite Microsoft .NET Framework 4.8 or newer. prerequisite Keysight IO Libraries Suite 18.1 or newer. supported Keysight M8070B 9.1.50.2. supported Keysight M8045A Pattern Generator. supported Keysight M8041A Pattern Generator. supported Keysight M8057B Remote Head for M8045A Pattern Generator. supported Keysight M8054A or M8195A Interference Source. supported Keysight M8046A Analyzer Module (Error Detector). supported Keysight 11636C Power Divider. supported Keysight 8490D Coaxial Fixed Attenuator. supported BIT-3000 DSGA FW 1.20 and System 1.11. supported Keysight UXR Sr 4-Channel Oscilloscope FW rev. 11.50.00601. modification Added the property to customize the time-out for Eye Opening Calibration. bugfix Fixed the issue of failing Test 2.1.7 when DFE tap level calibration is missing. bugfix Fixed the issue of failing (HF)SJ calibrations in the absence of DFE tap level. bugfix Fixed the issue of too few points for measurement in Calibrations at Gear1B. bugfix Fixed the issue of Inter Pair Skew Calibration connection setup description showing a repeated line. information CTLE has been defined in the M-PHY specification as a range of AC gain, DC gain, zero and poles frequencies. To have optimal calibration results at HS-Gear4 and HS-Gear5 data rates, the user can adjust the CTLE parameters as recommended in the M-PHY CTS tables 8, 9, 10, 11. information Due to the limitation of M8040A (min 50mV Amplitude, no internal interference source): - Need Attenuator + Power Divider + external interference source for Squelch tests. - Attenuators for HS tests and PWM tests are only applicable in Expert Mode. information Test 2.1.6 is marked as INFORMATIVE in the CTS Spec5.0 for multi-data-lane configurations: - It is in Compliance Mode when the protocol is UniPro. - It is in Expert Mode for all other protocol options. information If the BERT is M8040A, there is a random skew +/-300ps between Data Output Chan1 and Chan2 when switching the Data Rate. Therefore, the Inter Pair Skew Calibration needs to be performed for EACH Gear right before Test 2.1.6. 1.2.1.1 [available 2023-10-16]: prerequisite Windows 10 (64 bit), English, version 1809 or newer prerequisite Microsoft .NET Framework 4.8 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Keysight M8070B 9.1.50.2 supported Keysight M8045A Pattern Generator supported Keysight M8041A Pattern Generator supported Keysight M8057B Remote Head for M8045A Pattern Generator supported Keysight M8054A or M8195A Interference Source supported Keysight M8046A Analyzer Module (Error Detector) supported Keysight 11636C Power Divider supported Keysight 8490D Coaxial Fixed Attenuator supported BIT-3000 DSGA FW 1.20 and System 1.11 supported Keysight UXR Oscilloscope FW rev. 11.50.00601 bugfix Fixed the issue of applying calibrated DFE Tap Level to wrong procedures. information CTLE has been defined in the M-PHY specification as a range of AC gain, DC gain, zero and poles frequencies. To have optimal calibration results at HS-Gear4 and HS-Gear5 data rates, the user can adjust the CTLE parameters as recommended in the M-PHY CTS tables 8, 9, 10, 11. information Due to the limitation of M8040A (min 50mV Amplitude, no internal interference source): - Need Attenuator + Power Divider + external interference source for Squelch tests. - Attenuators for HS tests and PWM tests are only applicable in Expert Mode. information Test 2.1.6 is marked as INFORMATIVE in the CTS Spec5.0 for multi-data-lane configurations: - It is in Compliance Mode when the protocol is UniPro. - It is in Expert Mode for all other protocol options. information If the BERT is M8040A, there is a random skew +/-300ps between Data Output Chan1 and Chan2 when switching the Data Rate. Therefore, the Inter Pair Skew Calibration needs to be performed for EACH Gear right before Test 2.1.6. 1.2.0.2 [available 2023-10-16]: prerequisite Windows 10 (64 bit), English, version 1809 or newer prerequisite Microsoft .NET Framework 4.8 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Keysight M8070B 9.1.50.2 supported Keysight M8045A Pattern Generator supported Keysight M8041A Pattern Generator supported Keysight M8057B Remote Head for M8045A Pattern Generator supported Keysight M8054A or M8195A Interference Source supported Keysight M8046A Analyzer Module (Error Detector) supported Keysight 11636C Power Divider supported Keysight 8490D Coaxial Fixed Attenuator supported BIT-3000 DSGA FW 1.20 and System 1.11 supported Keysight UXR Oscilloscope FW rev. 11.50.00601 modification Changed the default Equalization settings for HS-Gear4 to reduce ISI value in ISI calibration. modification Added the calibration of DFE Tap Levels in Eye Opening Calibration of HS-Gear4 and HS-Gear5 data rates. bugfix Fixed the irrelevant message in Pop-ups when offline BER reader is selected. bugfix Fixed the missing ISI calibration in HS-Gear1A. bugfix Fixed the wrong OFFLINE flag value in EyeOpeningCalibration files. bugfix Generalized the connection diagram corresponding to the external clock generator. bugfix Fixed the inactive clock output in loop back when the CDR is not enabled. bugfix Fixed the incorrect divisor for reference clock in lower gears. bugfix Fixed the improper message indicating the amount of applied total jitter in test 2.1.7. information CTLE has been defined in the M-PHY specification as a range of AC gain, DC gain, zero and poles frequencies. To have optimal calibration results at HS-Gear4 and HS-Gear5 data rates, the user can adjust the CTLE parameters as recommended in the M-PHY CTS tables 8, 9, 10, 11. information Due to the limitation of M8040A (min 50mV Amplitude, no internal interference source): - Need Attenuator + Power Divider + external interference source for Squelch tests. - Attenuators for HS tests and PWM tests are only applicable in Expert Mode. information Test 2.1.6 is marked as INFORMATIVE in the CTS Spec5.0 for multi-data-lane configurations: - It is in Compliance Mode when the protocol is UniPro. - It is in Expert Mode for all other protocol options. information If the BERT is M8040A, there is a random skew +/-300ps between Data Output Chan1 and Chan2 when switching the Data Rate. Therefore, the Inter Pair Skew Calibration needs to be performed for EACH Gear right before Test 2.1.6. ======================================================================================================================= 1.0 [released 2022-11-30] ======================================================================================================================= 1.0.0.18 [available 2022-11-30]: prerequisite Windows 10 (64 bit), English, version 1809 or newer prerequisite Microsoft .NET Framework 4.8 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Keysight M8070B 9.1.50.2 supported Keysight M8045A Pattern Generator supported Keysight M8041A Pattern Generator supported Keysight M8057B Remote Head for M8045A Pattern Generator supported Keysight M8054A or M8195A Interference Source supported Keysight M8046A Analyzer Module (Error Detector) supported Keysight 11636C Power Divider supported Keysight 8490D Coaxial Fixed Attenuator supported BIT-3000 DSGA FW 1.20 and System 1.11 supported Keysight UXR Oscilloscope FW rev. 11.30.00601 new Supports Conformance Test Suite (CTS) version 1.0 for M-PHY® Specification version 5.0. information Due to the limitation of M8040 (min 50mV Amplitude, no internal interference source) - Need Attenuator + Power Divider + external interference source for Squelch tests. - Attenuators for HS tests and PWM tests are only applicable in Expert Mode. information Test 2.1.6 is marked as INFORMATIVE in the CTS Spec5.0 for multi-data-lane configurations - It is in Compliance Mode when the protocol is UniPro. - It is in Expert Mode for all other protocol options. information If the BERT is M8040A, there is a random skew +/-300ps between Data Output Chan1 and Chan2 when switching the DataRate, therefore the Inter Pair Skew Calibration needs to be performed for EACH Gear right before Test 2.1.6.