======================================================================================================================= 1.2 [released 2020-11-23] ======================================================================================================================= 1.2.6.2 [available 2023-09-08] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Microsoft Office Excel 2016, English supported D9021HDMC HDMI Test App ver. 2.38.5.0 supported DSAV334A SW rev. 6.60.00403 supported UXR0134A SW rev. 10.25.01302 supported AWG M8195A and M8197A FW rev. 4.1.0.0 bugfix Fixed OutOfMemory Exception by changing the processor architecture from 32 bits to 64 bits. known issue Not fully tested. 1.2.5.1 [available 2022-11-25] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Microsoft Office Excel 2016, English supported D9021HDMC HDMI Test App ver. 2.38.5.0 supported DSAV334A SW rev. 6.60.00403 supported UXR0134A SW rev. 10.25.01302 supported AWG M8195A and M8197A FW rev. 4.1.0.0 bugfix FRL EyeWidth and EyeHeight calibration sometimes failed when measuring small eyes. 1.2.4.0 [available 2021-12-13] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Microsoft Office Excel 2016, English supported D9021HDMC HDMI Test App ver. 2.38.5.0 supported DSAV334A SW rev. 6.60.00403 supported UXR0134A SW rev. 10.25.01302 supported AWG M8195A and M8197A FW rev. 4.1.0.0 bugfix Running waveform calculation of HFR2-1 to HFR2-4 tests after running HFR2-5 test waveform calculation caused an inconsistency in Compliance mode which is fixed. 1.2.3.0 [available 2021-10-08] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Microsoft Office Excel 2016, English supported D9021HDMC HDMI Test App ver. 2.38.5.0 supported DSAV334A SW rev. 6.60.00403 supported UXR0134A SW rev. 10.25.01302 supported AWG M8195A and M8197A FW rev. 4.1.0.0 bugfix Fixed the issue related to the loading and saving of vfp files. 1.2.2.1 [available 2021-09-02] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Microsoft Office Excel 2016, English supported D9021HDMC HDMI Test App ver. 2.38.5.0 supported DSAV334A SW rev. 6.60.00403 supported UXR0134A SW rev. 10.25.01302 supported AWG M8195A and M8197A FW rev. 4.1.0.0 bugfix Changes made to the BER estimation procedure algorithm to make sure the required number of bits are sent while testing marginal DUTs. bugfix Warning is not given anymore that scope application version 2.38.5 is not supported. 1.2.1.3 [available 2021-05-21] prerequisite Windows 10 (64 bit), English, version 2004 or newer prerequisite Microsoft .NET Framework 4.7.1 or newer prerequisite Keysight IO Libraries Suite 18.1 or newer supported Microsoft Office Excel 2016, English supported D9021HDMC HDMI Test App ver. 2.38.5.0 supported DSAV334A SW rev. 6.60.00403 supported UXR0134A SW rev. 10.25.01302 supported AWG M8195A and M8197A FW rev. 4.1.0.0 new Option to select the calibrations or tests required in the report. new Support for DSAV334A oscilloscope. new Cable Test ID 5-3 updated based on HDMI_CTS_1.4b_Errata_Test_ID_5-3 from HDMI LA. bugfix The wrong limits had been modified and the termination voltage had been set on the scope application for Cat3 cable tests. bugfix Corrected connection diagram for HDMI TMDS Cable tests. bugfix Cable test 7-1 inconsistencies have been fixed. bugfix TMDS Cable clock test no longer fails when run with N7010 probe. bugfix Selecting 30 bit or 48 bit color depth in Configure DUT threw an exception, which is fixed. modification The FRL waveform calculation is grouped as a different subset and the calibration exclamation mark dependency has been removed from these calculations. known issue TMDS 2.1 data jitter calibrations take more time to finish in UXR than in V-series oscilloscopes. 1.2.0.0 [available 2020-11-23] supported AWG M8195A and M8197A FW rev. 4.0.0.0 supported D9021HDMC HDMI Test App ver. 2.36.2.0 supported UXR0134A SW rev. 10.25.00702 new Support for HDMI Sink gCTS v2.1e new Added support for FRL calibrations on all FRL lanes depending on the data rate. new Added expert mode property to emulate custom S-Parameter file to calibrations and tests where ISI Filter was previously selectable. new Added support for Cat. 3 cable tests. bugfix Added "EnumLegacyValue" attributes to ensure that the new installer works with old vfp files. bugfix Fixed behavior of Keep Signals after test during Sink and Cable tests. bugfix Fixed the Scope App name from N5399C/D to D9021HDMC for TMDS Jitter Calibration property. bugfix Fixed no FRL waveform generated when running eye width calibration if the previous calibration failed at step 0. bugfix Fixed table names for HDMI FRL sink test procedures. bugfix Fixed critical error when loading project file. bugfix Fixed issue that FRL eye width calibration aborted with 0 value. known issue Wrong TPA shown for Cable tests. Use TPA-R instead of TPA-P on AWG side. ======================================================================================================================= 1.1 [released 2020-04-30] ======================================================================================================================= 1.1.3 [available 2020-06-30] tested with AWG M8195A and M8197A FW rev. 4.0.0.0 tested with D9021HDMC HDMI Test App ver. 2.35.0.0 tested with DSAV334A SW rev. 6.40.01201 tested with UXR0134A SW rev. 10.12.05302 bugfix Fixed user decision popup issues with ValiFrameRemote. bugfix Fixed InvalidProgramException issues due to encryption in ValiFrameRemote. 1.1.2 [available 2020-06-25] tested with AWG M8195A and M8197A FW rev. 4.0.0.0 tested with D9021HDMC HDMI Test App ver. 2.35.0.0 tested with DSAV334A SW rev. 6.40.01201 tested with UXR0134A SW rev. 10.12.05302 bugfix Fixed licensing issues with ValiFrameRemote. 1.1.1 [available 2020-05-29] tested with AWG M8195A and M8197A FW rev. 4.0.0.0 tested with D9021HDMC HDMI Test App ver. 2.35.0.0 tested with DSAV334A SW rev. 6.40.01201 tested with UXR0134A SW rev. 10.12.05302 bugfix Fixed issue with exporting FRL Differential Swing Tolerance Test results. 1.1.0 [available 2020-04-30] tested with AWG M8195A and M8197A FW rev. 4.0.0.0 tested with D9021HDMC HDMI Test App ver. 2.35.0.0 tested with DSAV334A SW rev. 6.40.01201 tested with UXR0134A SW rev. 10.12.05302 new Added support for UXR known issue TMDS jitter calibration requires frequent restart of UXR firmware. known issue Cable inter-pair test not working with UXR. known issue 2.1 TMDS jitter calibrations fail when started directly after 1.4 TMDS jitter calibrations. Restarting 2.1 TMDS jitter calibrations solves the issue. bugfix Fixed termination voltage issues with HF jitter calibrations. ======================================================================================================================= 1.0 [released 2020-04-29] ======================================================================================================================= 1.0.0 [available 2020-04-29] tested with AWG M8195A and M8197A FW rev. 4.0.0.0 tested with D9021HDMC HDMI Test App ver. 2.33.0.0 tested with DSAV334A SW rev. 6.40.01201 new Uses BLM (BitifEye License Manager) licensing. new Requires installation of BitifEye HDMI PHY IPAuxiliary files. new Configurations with M8190A, ParBERT system and Bias-T option with M8195A are not supported. new Support for HDMI gCTS v2.1b. new First ValiFrame HDMI PHY N5991 product release.